DragLab / Guides / The fastest time-trial position
GuideThe fastest time-trial position: what actually saves watts
Your position is the biggest, cheapest aero upgrade there is. But lower isn't always faster, and a position you can't hold isn't fast at all. Here's where the watts really are.
Narrow and low at the front, with a still head and a flat back, in a position you can hold and still produce power in. Make one change at a time, and measure each one, because what works for one rider can cost another.
Start with what the wind sees
From the front, the wind meets your head, shoulders, arms and legs far more than your bike. That's why position beats equipment: the rider is most of the drag. Every change below is about showing the wind less of you, or a smoother shape.
The changes worth trying
1. Bring your elbows and hands in
Narrowing your arms shrinks your frontal area directly, and fills the gap in front of your chest. Many riders gain here without losing any power, as long as breathing and steering stay comfortable.
2. Lower your front end, carefully
Dropping your arm pads reduces area, but it also closes the angle at your hips. Go too far and you lose power, or can't hold it. Riders often move the saddle forward a little to keep the hips open as the front comes down.
3. Keep your head low and still
Your head and helmet sit right at the front of the shape. A low, steady head, with the helmet's tail close to your back, is often one of the biggest single gains. Moving your head around costs watts, and you always need to see where you're going.
4. Try your hands higher
Angling the extensions up, with the hands in front of the face, helps some riders shelter the head and shoulders. It doesn't suit everyone, so test it against your current set-up.
5. Flat back, shoulders shrugged
A flatter back and slightly rounded, shrugged shoulders make a smoother, narrower shape. Your back should feel stable, not strained.
6. Knees close to the frame
Knees that splay outwards widen you. Tracking them close to the top tube helps, as long as it's natural for you and doesn't hurt.
What small changes add up to
Here's what DragLab found for its time-trial sample rider, a fast age-group position with a CdA of 0.246 m²:
| Change | Air drag saved at 40 km/h |
|---|---|
| Lower the front end by 2 cm | 4 W |
| Elbows in by 2 cm each side | 3 W |
| Both together | 7 W |
At the same power, those 7 W are worth 39 seconds over a 40 km time trial, 1:27 over a 70.3 bike leg and 2:55 over an Ironman bike leg. They come from two small changes, without any new kit.
Fast is only fast if you can hold it
- Power: a position that drops your power by more than it saves in drag is slower. Check your numbers in training.
- Time in position: every time you sit up, you lose most of the gain. A position you hold for the whole race wins.
- Comfort and safety: if anything hurts, or you can't see the road ahead, change it. A bike fitter or physio can help.
- Rules: time trials and triathlons have rules on bars and extensions. Check your event's before you change your set-up.
Then the kit, in order
- Skinsuit or tri-suit that fits tightly, with no flapping.
- An aero helmet that suits how you hold your head.
- Wheels and frame: real gains, but usually smaller and far more expensive than the ones above.
Test, don't guess
Aero advice is full of rules that don't hold for everyone. Change one thing at a time and measure it: with a 3D scan for quick comparisons at home, and with outdoor rides or a wind tunnel to confirm the big decisions. See how to measure your CdA.
Measure yours with DragLab
Scan your position with your iPhone and see your frontal area, your CdA and the watts the air costs you, then what to change.